PA6

Domo

DOMO Chemicals is one of the biggest PA 6 polyamide engineering plastics and chemicals producers in the world.

Product has been added.

Domamid®/TECHNYL® - change of product names PA6 and PA 6.6 of the DOMO brand.

After acquiring Solvay’s European Performance Polyamides business, DOMO is now exclusively producing and commercializing TECHNYL®, providing the worldwide market with the brand’s near 70 years of experience. Since 1953, TECHNYL® has offered the full range of polyamide 66 / polyamide 6 based solutions, widely used in diversified applications.

Attached is a brochure that explains the structure of the current nomenclature of TECHNYL® products.

We will gradually replace Domamid product cards with current TDS - TECHNYL® cards.

TECHNYL C 216S V30 NC

Polyamide 6, 30% glass fiber reinforced, improved surface finish, for injection moulding TECHNYL C 216S V30 NC has been developped especially for gas molding and for those applications requiring painting, chrome plating or high quality surface aspect. This material is polyamide 6 based compound, glass fiber reinforced 30%, with an amorphous PA matrix

(Previously DOMAMID HCE 6G30 NC)

TECHNYL C 216 V20 NC

Polyamide 6, 20% glass fiber reinforced, for injection moulding, natural color

(Previously DOMAMID 6G20 300 NC / DOMAMID 6G20 NC)

TECHNYL SAFEC 216FC V40 NC

Polyamide 6, 40% glass fiber reinforced, food contact approved for injection moulding.
Designed to be used in moulded part requiring good mechanical properties and food contact compliance in industrial consumer good as well as appliance applications.

(Previously DOMAMID 6G40FC 300 NC)

TECHNYL C 216 V50 NC

Polyamide 6, 50% glass fiber reinforced, improved flowability, for injection moulding, natural color

Previously DOMAMID 6LVG50 300 NC / DOMAMID 6G50 NC

TECHNYL C 216S V60 NC

Polyamide 6, 60% glass fiber reinforced, improved surface finish, for injection moulding, natural color.
TECHNYL C 216S V60 NC has been developped especially for gas molding and for those applications requiring painting, chrome plating or high quality surface aspect. This material is polyamide 6 based compound, glass fiber reinforced 60%, with an amorphous PA matrix.

(Previously DOMAMID HCE 6G60 NC)

TECHNYL PROTECT C 50H3 NC XB

Polyamide 6, heat-aging stabilized, halogen and red phosphorus free flame retardant, for injection moulding

(Previously DOMAMID FR 6V0M1)

TECHNYL C 202 NC

Polyamide 6, for injection moulding, natural color

(Previously DOMAMID 6 NC01)

TECHNYL PROTECT C 60G1 V25 NC

Polyamide 6, 25% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding

(Previously DOMAMID FR 6G25V0E NC)

TECHNYL C 216 V30 NC

Polyamide 6, reinforced with 30% of glass fibre, for injection moulding. This grade has good mechanical properties and offering an excellent combination between thermal and mechanical properties.

(Previously TECHNYL C 216 V30 NATURAL / DOMAMID 6G30 300 NC / DOMAMID 6G30 200 NC / DOMAMID 6G30 NC)

TECHNYL C 216S V65 NC

Polyamide 6, 65% glass fiber reinforced, improved surface finish, for injection moulding, natural color

(Previously DOMAMID HCE 6G65 NC)

TECHNYL C 216 MT30 NC

Polyamide 6, reinforced with 30% of mineral filler, for injection moulding.
The isotropic shrinkage and the good dimensional stability make it adequate for every kind of application in which the planarity of the part is important.

(Previously DOMAMID 6M30 NC)

TECHNYL 4EARTH C2E 216 V15 BK H

Polyamide 6, 15% glass fiber reinforced, for injection moulding, black

(Previously ECONAMID FL 6G15 BK)

TECHNYL 4EARTH C2E 216 V30 BK H

Polyamide 6, 30% glass fiber reinforced, for injection moulding, black

(Previously ECONAMID FL 6G30 BK)

TECHNYL C 216 V15 NC

Polyamide 6, 15% glass fiber reinforced, for injection moulding, natural color

(Previously DOMAMID 6G15 300 NC / DOMAMID 6G15 202 NC / DOMAMID 6G15 NC)

TECHNYL C 216 V25 GY 7488

Polyamide 6, 25% glass fiber reinforced, for injection moulding

(Previously DOMAMID 6G25)

TECHNYL 4EARTH C5E 236 MT10 BK

Polyamide 6, 10% mineral filler, improved impact resistance, for injection moulding

Previously DOMAMID R 6M10 500 BK

TECHNYL SAFE C 116FC NC

Polyamide 6, unfilled, improved flowability, food contact approved for injection moulding. Designed to be
used for food contact in industrial consumer good as well as appliance applications

(Previously DOMAMID 6LVFC NC)

TECHNYL C 216 BK XB

Polyamide 6, dry-blend, for injection moulding, black

(Previously DOMAMID 6 BKXB)

TECHNYL C 238 NC

Polyamide 6, heat-aging stabilized, impact modified, for injection moulding, natural color

(Previously DOMAMID 6I3H2 NC)

TECHNYL 4EARTH C2E 216 BK H

TECHNYL 4EARTH C2E 216 BK H Polyamide 6, for injection moulding, black

(Previously ECONAMID FL 6 BK)

TECHNYL C 236L1 NC

TECHNYL C 236L1 NC TECHNYL C 236L1 NC Polyamide 6, UV-stabilized, impact modified, for injection moulding

(Previously DOMAMID 6I1UV1 575)

TECHNYL C 216 V15 BK

TECHNYL C 216 V15 BK Polyamide 6, 15% glass fiber reinforced, for injection moulding, black

(Previously DOMAMID 6G15 300 BK)

TECHNYL 4EARTH C2E 216 V15 BK

TECHNYL 4EARTH C2E 216 V15 BK Polyamide 6, 15% glass fiber reinforced, for injection moulding, black

(Previously ECONAMID PLUS 6G15 BK)

TECHNYL C 236 V30 NC

TECHNYL C 236 V30 NC Polyamide 6, 30% glass fiber reinforced, improved impact resistance, for injection moulding

(Previously DOMAMID 6G30 500 NC)

TECHNYL C 236 V15 NC

TECHNYL C 236 V15 NC Polyamide 6, 15% glass fiber reinforced, impact modified, for injection moulding, natural color.

(Previously DOMAMID 6G15I1 301 NC)

TECHNYL 4EARTH C2E 219 V30 BK

TECHNYL 4EARTH C2E 219 V30 BK Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, for injection moulding, black.

(Previously ECONAMID PLUS 6G30H1 BK)

TECHNYL PROTECT C 60G1 V20 BK

TECHNYL PROTECT C 60G1 V20 BK Polyamide 6, 20% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding.

(Previously DOMAMID FR 6G20V0E)

TECHNYL 4EARTH C2E 236 BK H

TECHNYL 4EARTH C2E 236 BK H Polyamide 6, impact modified, for injection moulding, black

(Previously ECONAMID FL 6I2 BK)

TECHNYL PROTECT C 60G1 V30 NC

Polyamide 6, 30% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding,
natural color

Previously DOMAMID FR 6G30V0E NC

TECHNYL SLIDE C 216 Y10 NC

Unreinforced polyamide 6, self lubricating, containing molybdenum disulfide, for injection moulding

Previously DOMAMID L 6Y10

TECHNYL C 216 S30 NC

Polyamide 6, 30% glass beads, for injection moulding, natural color

Previously DOMAMID 6B30 300 NC

TECHNYL C 216 V30 BK Z

TECHNYL C 216 V30 BK Z is a polyamide 6, reinforced with 30% of glass fibre, for injection moulding. This grade has good mechanical
properties and offering an excellent combination between thermal and mechanical properties.

TECHNYL C 216 V50 BK Z


Polyamide 6, 50% glass fiber reinforced, improved flowability, for injection moulding, black
TECHNYL C 216 V50 BK Z is a polyamide 6, reinforced with 50% of glass fibre, for injection moulding. This grade offers high mechanical
strength, high surface aspect by easy flow & low pressure moulding for injection moulding.

Previously DOMAMID 6LVG50 300 BK

TECHNYL C 202TR NC

TECHNYL C 202TR NC is an unreinforced high transparency polyamide 6, for injection moulding. This grade offers good mechanical
properties and high transparency till 2-2,5 mm of thickness. Due to its benefits, it is adequate for applications which request transparency at
low thickness.

Previously TECHNYL PSB 231 NATURAL

TECHNYL C 216 V30 BL 2234 CF

TECHNYL C 216 V30 BL 2234 CF is a polyamide 6, reinforced with 30% of glass fibre, for injection moulding. This grade has good mechanical
properties and offering an excellent combination between thermal and mechanical properties.

TECHNYL C 216 V30 NC

TECHNYL C 216 V30 NC is a polyamide 6, reinforced with 30% of glass fibre, for injection moulding. This grade has good mechanical
properties and offering an excellent combination between thermal and mechanical properties.

Previously TECHNYL C 216 V30 NATURAL / DOMAMID 6G30 300 NC / DOMAMID
6G30 200 NC / DOMAMID 6G30 NC

TECHNYL C 216 V35 BK Z

TECHNYL C 216 V35 BK Z is a polyamide PA6, reinforced with 35 % of glass fibre, for injection moulding. This grade has good mechanical
properties and offering an excellent combination between thermal and mechanical properties.

TECHNYL C 216 V35 NC

TECHNYL C 216 V35 NC is a polyamide PA6, reinforced with 35 % of glass fibre, for injection moulding. This grade has good mechanical
properties and offering an excellent combination between thermal and mechanical properties.

Previously TECHNYL C 216 V35 NATURAL / DOMAMID 6G35 310 NC / DOMAMID
6G35 300 NC

TECHNYL C 216 V40 BK

Polyamide 6, 40% glass fiber reinforced, improved flowability, for injection moulding, black.

Previously DOMAMID 6LVG40 300 BK

TECHNYL C 216 V40 BK Z

TECHNYL C 216 V40 BK Z is a polyamide 6, reinforced with 40% of glass fibre, for injection moulding. This grade has good mechanical
properties and offering an excellent combination between thermal and mechanical properties.

TECHNYL C 218 MT25 V15 BK

TECHNYL C 218 MT25 V15 BK is a polyamide 6, reinforced 25 % mineral filler and 15 % of glass fibre, heat stabilized, for injection moulding.
This grade offers an excellent planarity of the end product, with good mechanical properties and good dimensional stability.

TECHNYL C 218 V30 BK 21N

TECHNYL C 218 V30 BK 21N is a polyamide 6, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. The product offers
an excellent combination between thermal and mechanical properties.

TECHNYL C 218 V30 BK D

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, for injection moulding, black.

Previously DOMAMID 6G30H2 BK

TECHNYL C 218 V35 BK

TECHNY C 218 V35 BK is a polyamide 6, reinforced with 35% of glass fiber, heat stabilized, for injection moulding. The product offers an
excellent combination between thermal and mechanical properties.

TECHNYL C 218 V35 BK 21N

TECHNYL C 218 V35 BK 21N is a polyamide 6, reinforced with 35% of glass fiber, heat stabilized, for injection moulding. The product offers
an excellent combination between thermal and mechanical properties.

TECHNYL C 236SI V30 NC

TECHNYL C 236SI V30 NC is a polyamide 6 reinforced with 30% of glass fiber, with improved impact resistance, for injection moulding. This
grade offers high impact strength and good mechanical properties.

TECHNYL PROTECT C 52G4 MZ25 WT R9003

TECHNYL PROTECT C 52G4 MZ25 WT R9003 is a polyamide 6 based on a non-phosphorous and Non-halogenated flame retardant system,
reinforced with 25% of mineral filler, heat stabilized, for injection moulding. This grade offers a robust glow wire resistance, combined with
enhanced processing behavior suitable for thin wall parts.

Previously TECHNYL C 52G4 MZ25 WHITE R9003

TECHNYL SHAPE C 402M NC

TECHNYL SHAPE C 402M NC is an unreinforced polyamide 6, high viscosity, for extrusion. This grade offers high flexibility and high impact
performance.

Previously TECHNYL C 402M NATURAL

TECHNYL STAR S 60X1 V30 GY R7035 CF

TECHNYL STAR S 60X1 V30 GY R7035 CF is a grade based on a non-halogenated flame retardant system and on a patented high flow
polyamide 6 resin (TechnylStar), reinforced of 30% of glass fiber, heat stabilized, for injection moulding. This grade is heat stabilized and
provides optimized injection moulding performance.

TECHNYL STAR S 60X1 V30 NC

TECHNYL STAR S 60X1 V30 NC is a grade based on a non-halogenated flame retardant system and on a patented high flow polyamide 6
resin (TechnylStar), reinforced of 30% of glass fiber, heat stabilized, for injection moulding. This grade is Heat stabilized and provides
optimized injection moulding performance.

TECHNYL STAR SX 218 V50 BK Z

TECHNYL STAR SX 218 V50 BK Z is based on a patented high flow polyamide 6 resin (Technylstar), heat stabilized, reinforced with 50% of
glass fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade allows more freedom in mould and part design
versus a standard polyamide solutions.

TECHNYL 4EARTH C2E 216 V30 BK

Polyamide 6, 30% glass fiber reinforced, for injection moulding, black.

Previously ECONAMID PLUS 6G30 BK

TECHNYL 4EARTH C2E 216 V35 BK

Polyamide 6, 35% glass fiber reinforced, for injection moulding, black.

Previously ECONAMID PLUS 6G35 BK

TECHNYL 4EARTH C2E 216 V35 BK R9004

Polyamide 6, 35% glass fiber reinforced, for injection moulding.

Previously ECONAMID PLUS 6G35 BKR9004

TECHNYL 4EARTH C2E 216M BK

Polyamide 6, impact modified, for injection moulding, black.

Previously ECONAMID PLUS 6I1 B

TECHNYL 4EARTH C2E 218 V30 BK

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, for injection moulding, black.

Previously ECONAMID PLUS 6G30H2 BK

TECHNYL 4EARTH C2E 218 V35 BK

Polyamide 6, 35% glass fiber reinforced, heat-aging stabilized, for injection moulding, black.

Previously ECONAMID PLUS 6G35H2 BK

TECHNYL 4EARTH C2E 218 V35 BK H

Polyamide 6, 35% glass fiber reinforced, heat-aging stabilized, for injection moulding, black.

Previously ECONAMID FL 6G35H2 BK

TECHNYL 4EARTH C2E 218S MV30 BK 21N

Polyamide 6, 30% glass fiber and mineral filler, heat-aging stabilized, for injection moulding.

Previously ECONAMID PLUS 6GM3010H2 212 BK99

TECHNYL 4EARTH C2E 218S MV30 BK 21N H

Polyamide 6, 30% glass fiber and mineral filler, heat-aging stabilized, for injection moulding.

Previously ECONAMID FL 6GM3010H2 212 BK99

TECHNYL 4EARTH C2E 219 MX20 V10 BK H

Polyamide 6, 30% glass fiber and mineral filler, heat-aging stabilized, for injection moulding, black.

Previously ECONAMID FL 6GM3010H1 212 BK

TECHNYL 4EARTH C2E 236 BK

Polyamide 6, impact modified, for injection moulding, black.

Previously ECONAMID PLUS 6I2 BK

TECHNYL 4EARTH C5E 236 V30 BK

Polyamide 6, 30% glass fiber reinforced, improved impact resistance, for injection moulding, black.

Previously ECONAMID PLUS 6G30 500 BK

TECHNYL 4EARTH C9E 218 C30 NC H

Polyamide 6, 30% carbon fiber reinforced, heat-aging stabilized, for injection moulding, natural color.

Previously ECONAMID AIR 6RC30H2 NC99

TECHNYL 4EARTH C9E 218 C50 NC H

Polyamide 6, 50% carbon fiber reinforced, heat-aging stabilized, for injection moulding, natural color.

Previously ECONAMID AIR 6RC50H2 NC99

TECHNYL C 102 NC

Polyamide 6, improved flowability, for injection moulding, natural color.

Previously DOMAMID 6LV NC

TECHNYL C 102 NC DF

TECHNYL C 102 NC DF us a polyamide 6 unfilled, modified and optimized for pre-processing, with improved flowability, for fast cycle
injection moulding, natural color.

TECHNYL C 116 S15 NC

Polyamide 6, 15% glass beads, improved flowability, for injection moulding, natural color.

Previously DOMAMID 6LVB15 300 NC

TECHNYL C 116 V30 NC

Polyamide 6, 30% glass fiber reinforced, improved flowability, for injection moulding, natural color.

Previously DOMAMID 6LVG30 300 NC

TECHNYL C 116S V15 BK 21N

Polyamide 6, 15% glass fiber reinforced, improved flowability, for injection moulding, black.

Previously DOMAMID 6LVG15 300 BK

TECHNYL C 118 S30 BK 9302

Polyamide 6, 30% glass beads, heat-aging stabilized, improved flowability, for injection moulding.

Previously DOMAMID 6LVB30H2 BK99302

TECHNYL C 118 V35 BK

Polyamide 6, 35% glass fiber reinforced, heat-aging stabilized, improved flowability, for injection moulding, black.

Previously DOMAMID 6LVG35H2 BK

TECHNYL C 216 V40 NC

Polyamide 6, 40% glass fiber reinforced, improved flowability, for injection moulding, natural color.

Previously DOMAMID 6LVG40 300 NC

TECHNYL C 216 V60 NC

Polyamide 6, 60% glass fiber reinforced, improved flowability, for injection moulding, natural color.

Previously DOMAMID 6LVG60 NC

TECHNYL C 216M NC

Polyamide 6, impact modified, for injection moulding.

Previously DOMAMID 6I1 575 NC

TECHNYL C 218 V40 BK

Polyamide 6, 40% glass fiber reinforced, heat-aging stabilized, improved flowability, for injection moulding, black.

Previously DOMAMID 6LVG40H2 BK

TECHNYL C 218 V50 BK

Polyamide 6, 50% glass fiber reinforced, heat-aging stabilized, improved flowability, for injection moulding, black.

Previously DOMAMID 6LVG50H2 BK

TECHNYL C 218 V50 NC

Polyamide 6, 50% glass fiber reinforced, heat-aging stabilized, improved flowability, for injection moulding, natural color.

Previously DOMAMID 6LVG50H2 NC

TECHNYL C 218M BK

Polyamide 6, heat-aging stabilized, impact modified, for injection moulding, black.

Previously DOMAMID 6I1H2 BK

TECHNYL C 219L1 NC XB

Polyamide 6, heat-aging stabilized, UV-stabilized, for injection moulding.

Previously DOMAMID 6H1UV1 NCXB

TECHNYL C 219M BK

Polyamide 6, heat-aging stabilized, impact modified, for injection moulding, black.

Previously DOMAMID 6I1H1 BK

TECHNYL C 226 BK

Polyamide 6, nucleated, for injection moulding, black.

Previously DOMAMID 6N1 BK

TECHNYL C 226 NC

Polyamide 6, nucleated, for injection moulding, natural color.

Previously DOMAMID 6N1 NC

TECHNYL C 236 NC

Polyamide 6, impact modified, for injection moulding.

Previously DOMAMID 6I2 NC

TECHNYL C 236 V15 BK

Polyamide 6, 15% glass fiber reinforced, impact modified, for injection moulding, black.

Previously DOMAMID 6G15I1 301 BK

TECHNYL C 236SI NC

Polyamide 6, low temperature impact modified, for injection moulding.

Previously DOMAMID 6IK2 NC

TECHNYL C 239L1 BK 9279 LP

Polyamide 6, heat-aging stabilized, UV-stabilized, impact modified, lasermarkable, for injection moulding.

Previously DOMAMID 6I2LS3H1UV1 701 BK99279

TECHNYL C 246SI V15 BK

Polyamide 6, 15% glass fiber reinforced, low temperature impact modified, for injection moulding, black.

Previously DOMAMID 6G15IK1 202 BK

TECHNYL C 246SI V15 NC

Polyamide 6, 15% glass fiber reinforced, low temperature impact modified, for injection moulding, natural color.

Previously DOMAMID 6G15IK1 202 NC

TECHNYL C 246SI V30 BK

Polyamide 6, 30% glass fiber reinforced, low temperature impact modified, for injection moulding, black.

Previously DOMAMID 6G30IK1 202 BK

TECHNYL C 258SI V15 BK 9177

Polyamide 6, 15% glass fiber reinforced, heat-aging stabilized, low temperature impact modified, for injection moulding.

Previously DOMAMID 6G15IK3H2 BK99177

TECHNYL PROTECT C 60G1 V30 GY 7464

Polyamide 6, 30% glass fiber reinforced, halogen and red phosphorus free flame retardant, for injection molding, grey.

Previously DOMAMID FR 6G30V0E 122 GY77464

TECHNYL PROTECT CF 60 V30 GY 7502

Polyamide 6, 30% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, improved impact
resistance, improved flowability, for injection moulding.

Previously DOMAMID FR 6LVG30V0E 903 GY77502

TECHNYL SAFE C 216FC NC

TECHNYL SAFE C 216FC NC is a polyamide 6, unfilled, food contact approved for injection moulding. Designed to be used in moulded parts
requiring food contact compliance in industrial, consumer good as well as appliance applications.

Previously DOMAMID 6FC NC

TECHNYL SAFE C 216FC V30 BK

TECHNYL SAFE C 216FC V30 BK is a polyamide 6, 30% glass fiber reinforced, food contact approved for injection moulding. Designed to be
used in moulded parts requiring food contact compliance in industrial, consumer good as well as appliance applications.

Previously DOMAMID 6G30FC 300 BK

TECHNYL SAFE C 226FC NC

TECHNYL SAFE C 226FC NC is a polyamide 6, unfilled, improved flowability, food contact approved for injection moulding. Designed for fast
cycling injection moulding to be used in food contact in industrial consumer good as well as appliance applications.

Previously DOMAMID 6N1FC NC

TECHNYL STAR S 218 V60 BK 21N

Polyamide 6, 60% glass fiber reinforced, heat-aging stabilized, improved flowability, for injection moulding, black
TECHNYL STAR S 218 V60 Black 21N is a polyamide 6, reinforced with 60% of glass fiber, heat stabilized, improved flowability, for injection
moulding. Due to its flow caracteristics, this grade allows more freedom in mould and part design versus a standard polyamide solutions.

Previously DOMAMID 6LVG60H2 BK

TECHNYL 4EARTH C1E 216 V40 NC

Polyamide 6, 40% glass fiber reinforced, for injection moulding, natural color.

Previously ECONAMID ORO 6G40 124

TECHNYL C 116L1 V30 BK

Polyamide 6, 30% glass fiber reinforced, UV-stabilized, improved flowability, for injection moulding.

Previously DOMAMID 6LVG30UV1 BK

TECHNYL C 219 BK

Polyamide 6, heat-aging stabilized, for injection moulding, black.

Previously DOMAMID 6H1 BK

TECHNYL C 248SI V20 BK 21N

Polyamide 6, 20% glass fiber reinforced, heat-aging stabilized, low temperature impact modified, for injection molding, black.

TECHNYL C 248SI V40 BK 31N

Polyamide 6, 40% glass fiber reinforced, heat-aging stabilized, improved surface finish, low temperature impact modified, for injection
molding, black.

Previously DOMAMID 6G40IK1H2 BK99

TECHNYL PROTECT C 52G2 BK 9283

Polyamide 6 unfilled, for fire and electrical overall properties, with improved flowability, for injection moulding.

Previously DOMAMID 6LVGT85 BK99283

TECHNYL PROTECT C 52G2 GY 7504

Polyamide 6 unfilled, for fire and electrical overall properties, with improved flowability, for injection moulding.

Previously DOMAMID 6LVGT85 GY77504

TECHNYL PROTECT C 52G2 MV25 NC

TECHNYL PROTECT C 52G2 MV25 NC is a polyamide 6 based on a non-phosphorous and Non-halogenated flame retardant system,
reinforced with 25% of mixed glass fibre and mineral filler, for injection moulding. This flame retardant grade offers a low smoke toxicity, a
high glow-wire resistance and good all round mechanical properties.

Previously TECHNYL C 52G2 MV25 NATURAL

TECHNYL PROTECT C 52G2 NC

Polyamide 6 unfilled, for fire and electrical overall properties, with improved flowability, for injection moulding.

Previously DOMAMID 6LVGT85

TECHNYL 4EARTH C1E 316 V30 NC

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

Previously ECONAMID ORO 6G30 NC01

TECHNYL 4EARTH C2E 216 S15 V15 Y20 BK

Polyamide 6, 30% glass fiber and glass beads, for injection moulding, black.

Previously ECONAMID L 6GB3015Y20 BK

TECHNYL 4EARTH C2E 216 V20 BK

Polyamide 6, 20% glass fiber reinforced, for injection moulding, black.

Previously ECONAMID PLUS 6G20 BK

TECHNYL 4EARTH C2E 216 V20 NC

Polyamide 6, 20% glass fiber reinforced, for injection moulding, black.

Previously ECONAMID PLUS 6G20 NC

TECHNYL 4EARTH C2E 216 V25 BK

Polyamide 6, 25% glass fiber reinforced, for injection moulding, black.

Previously ECONAMID PLUS 6G25 BK

TECHNYL 4EARTH C2E 216S V30 BK 21N

Polyamide 6, 30% glass fiber reinforced, for injection moulding, black.

Previously ECONAMID PLUS 6G30 201 BK99

TECHNYL C 206PW NC

Polyamide 6, powder, general purpose.

Previously DOMAMID PW 6 NC

TECHNYL C 216 BK 9223 XB

Polyamide 6, for injection moulding.

Previously DOMAMID 6 BK 9223 XB

TECHNYL C 216 WT R9010 BL

Polyamide 6, for injection moulding.

Previously DOMAMID 6 WTR9010BL

TECHNYL C 216 YL 1011 BL

Polyamide 6, for injection moulding.

Previously DOMAMID 6

TECHNYL C 216L1 BK 9280 XB

Polyamide 6, UV-stabilized, for injection moulding.

Previously DOMAMID 6UV1 BK99280XB

TECHNYL C 216L1 BK XB

Polyamide 6, UV-stabilized, for injection moulding.

Previously DOMAMID 6UV1 BKXB

TECHNYL C 216L1 V30 BK

Polyamide 6, 30% glass fiber reinforced, UV-stabilized, for injection moulding.

Previously DOMAMID 6G30UV1

TECHNYL C 216L1 V30 NC

Polyamide 6, 30% glass fiber reinforced, UV-stabilized, for injection moulding.

Previously DOMAMID 6G30UV1

TECHNYL C 216L1 WT 1102 XB

Polyamide 6, UV-stabilized, for injection moulding.

Previously DOMAMID 6UV1 WT91102XB

TECHNYL C 218 V15 BK D

Polyamide 6, 15% glass fiber reinforced, heat-aging stabilized, for injection moulding, black.

Previously DOMAMID 6G15H2 BK

TECHNYL C 219 V30 BK

Polyamide 6, 30% glass fiber reinforced, organic heat stabilized, electro-friendly, for injection molding, black.

Previously DOMAMID 6G30H1 BK

TECHNYL C 219 V30 NC

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, for injection moulding.

Previously DOMAMID 6G30H1 NC

TECHNYL C 236 V30 BK

Polyamide 6, 30% glass fiber reinforced, improved impact resistance, for injection moulding.

Previously DOMAMID 6G30 500 BK

TECHNYL C 246SI V40 BK

Polyamide 6, 40% glass fiber reinforced, low temperature impact modified, for injection moulding, black.

Previously DOMAMID 6G40IK1 BK

TECHNYL PROTECT C 52G1 V20 WT 9003

TECHNYL PROTECT C 52G1 V20 WT 9003 is a polyamide 6 based on a non-phosphorous and Non-halogenated flame retardant system,
reinforced with 20% of glass fiber, heat stabilized, for injection moulding. This flame retardant grade with excellent moulding and electrical
performance.

TECHNYL PROTECT C 52G3 V20 GY 7464

Polyamide 6, 20% glass fiber reinforced, heat-aging stabilized, for injection moulding

TECHNYL SAFE C 216FC V30 NC

TECHNYL SAFE C 216FC V30 NC is a polyamide 6, 30% glass fiber reinforced, food contact approved for injection moulding. Designed to be
used in moulded parts requiring food contact compliance in industrial, consumer good as well as appliance applications.

Previously DOMAMID 6G30FC 300 NC

TECHNYL4EARTH C2E 216 V20 BK 9039

Polyamide 6, 20% glass fiber reinforced, for injection moulding, black.

Previously ECONAMID PLUS 6G20 BK99039

TECHNYL 4EARTH C2E 216 V20 GY R7045

Polyamide 6, 20% glass fiber reinforced, for injection moulding, black.

Previously ECONAMID PLUS 6G20 GYR7045

TECHNYL 4EARTH C2E 216 BK

Polyamide 6, for injection moulding, black.

Previously ECONAMID PLUS 6 BK

TECHNYL 4EARTH C2E 216 GY 7484

Polyamide 6, for injection moulding.

Previously ECONAMID PLUS 6 GY77484

TECHNYL 4EARTH C2E 216 S30 BK

Polyamide 6, 30% glass beads, for injection moulding, black.

Previously ECONAMID PLUS 6B30 BK

TECHNYL 4EARTH C2E 216L1 V30 BK

Polyamide 6, 30% glass fiber reinforced, UV-stabilized, for injection moulding, black.

Previously ECONAMID PLUS 6G30UV1 BK

TECHNYL 4EARTH C2E 219 BK

Polyamide 6, heat-aging stabilized, for injection moulding, black.

Previously ECONAMID PLUS 6H1 BK

TECHNYL 4EARTH C2E 219 V35 BK H

Polyamide 6, 35% glass fiber reinforced, heat-aging stabilized, for injection moulding, black.

Previously ECONAMID FL 6G35H1 BK

TECHNYL 4EARTH C2E 316 BK

Polyamide 6, for injection moulding, black.

TECHNYL 4EARTH C2E 316 BK H

Polyamide 6, for injection moulding, black.

TECHNYL 4EARTH C5E 216 BK

Polyamide 6, for injection moulding.

Previously DOMAMID R 6 BK

TECHNYL 4EARTH C5E 236 V20 BK

Polyamide 6, 20% glass fiber reinforced, improved impact resistance, for injection moulding, black.

Previously ECONAMID PLUS 6G20 500 BK

TECHNYL 4EARTH C5E 346 BK H

Polyamide 6, impact modified, for extrusion, black.

Previously ECONAMID ORO 6I4 510 BK

TECHNYL C 116 BK

Polyamide 6, improved flowability, for injection moulding.

Previously DOMAMID 6LV 100

TECHNYL C 116 BK LP

Polyamide 6, improved flowability, for injection moulding.

Previously DOMAMID 6LV 909

TECHNYL C 116 RD 3140

Polyamide 6, improved flowability, for injection moulding.

Previously DOMAMID 6LV 100

TECHNYL C 116 V25 BL 5025

Polyamide 6, 25% glass fiber reinforced, improved flowability, for injection moulding.

Previously DOMAMID 6LVG25

TECHNYL C 116 V30 BK

Polyamide 6, 30% glass fiber reinforced, improved flowability, for injection moulding.

Previously DOMAMID 6LVG30

TECHNYL C 116 WT 1127

Polyamide 6, improved flowability, for injection moulding.

Previously DOMAMID 6LV 605

TECHNYL C 116 YL 1073 LP

Polyamide 6, improved flowability, for injection moulding.

Previously DOMAMID 6LV 910

TECHNYL C 206F NC

TECHNYL C 206F NC is an unreinforced polyamide PA6, standard for fast injection cycles, for injection moulding. This grade has high fluidity
and a good mould release.

TECHNYL C 216 GY F650

TECHNYL C 216 GY F650 is an unreinforced polyamide 6, standard nucleation for fast cycling, for injection moulding. This grade offers a
high fluidity and good mould release.

Previously DOMAMID 6 GY7F650

TECHNYL C 216 S15 BK

Polyamide 6, 15% glass beads, for injection moulding, black color.

Previously DOMAMID 6B15 BK

TECHNYL C 216 S15 V15 BK

Polyamide 6, 30% glass fiber and glass beads, for injection moulding.

Previously DOMAMID 6GB3015 308 BK

TECHNYL C 216 S20 V10 NC

Polyamide 6, 30% glass fiber and glass beads, for injection moulding.

Previously DOMAMID 6GB3010 NC

TECHNYL C 216 S25 V25 NC

Polyamide 6, 50% glass fiber and glass beads, improved flowability, for injection moulding, natural color.

Previously DOMAMID 6LVGB5025 NC

TECHNYL C 216 V10 NC

Polyamide 6, 10% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G10

TECHNYL C 216 V18 NC

TECHNYL C 216 V18 NC is a reinforced polyamide 6 with 18% of glass fiber, for injection moulding. This grade has good mechanical
properties and offering an excellent combination between thermal and mechanical properties.

TECHNYL C 216 V25 NC

Polyamide 6, 25% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G25 300 NC / DOMAMID 6G25

TECHNYL C 216 V30 BK 111 D

Polyamide 6, 30% glass fiber reinforced, for injection moulding, black.

Previously DOMAMID 6G30 111 BK

TECHNYL C 216 V30 NC 623 D

Polyamide 6, 30% glass fiber reinforced, for injection moulding, natural color.

Previously DOMAMID 6G30 623 NC

TECHNYL C 216 V35 NC 310

Polyamide 6, 35% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G35 310 NC

TECHNYL C 216 V50 BK

Polyamide 6, 50% glass fiber reinforced, for injection moulding, black.

Previously DOMAMID 6G50FC 300 BK

TECHNYL C 216 V60 BK 9273

Polyamide 6, 60% glass fiber reinforced, improved flowability, for injection moulding.

Previously DOMAMID 6LVG60

TECHNYL C 216 V7 NC

Polyamide 6, 7% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G0

TECHNYL C 216F GY P423C XB

Polyamide 6, for fast cycling injection moulding, for injection moulding.

Previously DOMAMID S 6 GYP423CXB

TECHNYL C 216F GY P425C XB

Polyamide 6, for fast cycling injection moulding, for injection moulding.

Previously DOMAMID S 6 GYP425CXB

TECHNYL C 216L1 BR 8062 XB

Polyamide 6, UV-stabilized, for injection moulding.

Previously DOMAMID 6UV1 BW88062XB

 

TECHNYL C 216L1 V15 BK

Polyamide 6, 15% glass fiber reinforced, UV-stabilized, for injection moulding.

Previously DOMAMID 6G15UV1

TECHNYL C 216L1 V15 BK 9280

Polyamide 6, 15% glass fiber reinforced, UV-stabilized, for injection moulding.

Previously DOMAMID 6G15UV1

TECHNYL C 216S V30 BK

Polyamide 6, 30% glass fiber reinforced, improved surface finish, for injection moulding
TECHNYL C 216S V30 BK has been developped especially for gas molding and for those applications requiring painting, chrome plating or
high quality surface aspect. This material is polyamide 6 based compound, glass fiber reinforced 30%, with an amorphous PA matrix.

Previously DOMAMID HCE 6G30 BK

TECHNYL C 216S V50 BK

Polyamide 6, 50% glass fiber reinforced, improved surface finish, for injection moulding.

Previously DOMAMID HCE 6G50 BK

TECHNYL C 216S V50 NC

Polyamide 6, 50% glass fiber reinforced, improved surface finish, for injection moulding
TECHNYL C 216S V50 NC has been developped especially for gas molding and for those applications requiring painting, chrome plating or
high quality surface aspect. This material is polyamide 6 based compound, glass fiber reinforced 30%, with an amorphous PA matrix.

Previously DOMAMID HCE 6G50 NC

TECHNYL C 218 V20 BK 9314

Polyamide 6, 20% glass fiber reinforced, heat-aging stabilized, for injection moulding, black.

Previously DOMAMID 6G20H2 BK

TECHNYL C 218 V45 BK

Polyamide 6, 45% glass fiber reinforced, heat-aging stabilized, improved flowability, for injection moulding, black.

Previously DOMAMID 6LVG45H2 BK

TECHNYL C 219 MT40 NC

Polyamide 6, 40% mineral filler, heat-aging stabilized, for injection moulding.

Previously DOMAMID 6M40H1

TECHNYL C 219M NC

Polyamide 6, heat-aging stabilized, impact modified, for injection moulding.

Previously DOMAMID 6I1H1

TECHNYL C 226F NC

Polyamide 6, nucleated, for injection moulding, natural color.

Previously DOMAMID 6N1 402 NC

TECHNYL C 226M NC

Polyamide 6, nucleated, improved impact resistance, for injection moulding.

Previously DOMAMID 6N1 500 NC

TECHNYL C 236L1 V15 BK

Polyamide 6, 15% glass fiber reinforced, UV-stabilized, improved impact resistance, for injection moulding.

Previously DOMAMID 6G15UV1 500

TECHNYL C 236L1 V15 NC

Polyamide 6, 15% glass fiber reinforced, UV-stabilized, improved impact resistance, for injection moulding.

Previously DOMAMID 6G15UV1 500

TECHNYL C 246 V30 NC

TECHNYL C 246 V30 NC is a polyamide 6, reinforced with 30 % of glass fibre, impact modified, for injection moulding. This grade offers high
impact strength and good mechanical properties.

TECHNYL C 246SI NC

Polyamide 6, low temperature impact modified, for injection moulding.

Previously DOMAMID 6IK4

TECHNYL C 246SIL1 GN 6076

Polyamide 6, UV-stabilized, low temperature impact modified, for injection moulding.

Previously DOMAMID 6IK4UV1

TECHNYL C 249L1 V30 NC

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, UV-stabilized, impact modified, for injection moulding.

Previously DOMAMID 6G30I1H1UV1

TECHNYL C 249L1 V30 RD 3202

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, UV-stabilized, impact modified, for injection moulding.

Previously DOMAMID 6G30I1H1UV1 RD33202

TECHNYL C 256SI NC

Polyamide 6, low temperature impact modified, for injection moulding.

Previously DOMAMID 6IK5 NC

TECHNYL C 302 NC

Polyamide 6, medium viscosity, for injection moulding.

Previously DOMAMID 6MV

TECHNYL C 316 V30 BK

Polyamide 6, 30% glass fiber reinforced, medium viscosity, for injection moulding, black.

Previously DOMAMID 6MVG30 BK

TECHNYL CR 218 V30 BK 1N

TECHNYL CR 218 V30 BK 1N is a polyamide 6, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. It contains recycled
raw materials. This grade offers a good combination between thermal and mechanical properties.

TECHNYL PROTECT C 50H2 GY 185N

TECHNYL PROTECT C 50H2 GY 271N is an unreinforced polyamide 6 based on a non-phosphorous and non-halogenated flame retardant
system, heat stabilized, for injection moulding. This product, UL94 VO @ 0,4mm, offers excellent moldability together with good stiffness.

TECHNYL PROTECT C 50H2 GY 271N

TECHNYL PROTECT C 50H2 GY 271N is an unreinforced polyamide 6 based on a non-phosphorous and non-halogenated flame retardant
system, heat stabilized, for injection moulding. This product, UL94 VO @ 0,4mm, offers excellent moldability together with good stiffness.

TECHNYL PROTECT C 52G1 V25 GY 2225 CF

TECHNYL PROTECT C 52G1 V25 GY 2225 CF is a polyamide 6 based on a non-phosphorous and Non-halogenated flame retardant system,
reinforced with 25% of glass fiber, heat stabilized, for injection moulding. This flame retardant grade with excellent moulding and electrical
performance.

TECHNYL PROTECT C 52G1 V30 GY 2408CF

TECHNYL PROTECT C 52G1 V30 GY 2408CF is a polyamide 6 based on a non-phosphorous and Non-halogenated flame retardant system,
reinforced with 30% of glass fiber, heat stabilized, for injection moulding. This flame retardant grade with excellent moulding and electrical
performance.

Previously TECHNYL C 52G1 V30 GREY 2408CF

TECHNYL PROTECT C 60 MX10 V10 BK

Polyamide 6, 20% glass fiber and mineral filler, heat-aging stabilized, halogen and red phosphorus free flame retardant, for injection
moulding.

Previously DOMAMID FR 6GT2010V0E BK

TECHNYL PROTECT C 60 MX10 V10 GY 7513

Polyamide 6, 20% glass fiber and mineral filler, heat-aging stabilized, halogen and red phosphorus free flame retardant, for injection
moulding.

Previously DOMAMID FR 6GT2010V0E

TECHNYL PROTECT C 60G1 V25 BK

Polyamide 6, 25% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding.

Previously DOMAMID FR 6G25V0E BK

TECHNYL PROTECT C 60G1 V30 WT 1174

Polyamide 6, 30% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding.

Previously DOMAMID FR 6G30V0E WT91174

TECHNYL SAFE C 216MFC NC

TECHNYL SAFE C 216MFC NC is a polyamide 6, unfilled, impact modified, food contact approved for injection moulding. Designed to be
used in moulded parts requiring food contact compliance in industrial, consumer good as well as appliance applications.

Previously DOMAMID 6I1FC

TECHNYL SHAPE C 406P3 NC

Polyamide 6, plasticized, high viscosity, for extrusion.

Previously DOMAMID 6HVPS3 NC01

TECHNYL SHAPE C 442 BK V

TECHNYL SHAPE C 442 BK V is an unreinforced polyamide 6, impact modified, high viscosity, for extrusion. This grade offers high flexibility
and very high impact resistance even at low temperature.

Previously TECHNYL C 442 BLACK V

TECHNYL SHAPE C 548B BK

TECHNYL SHAPE C 548B BK is an unreinforced polyamide 6, high viscosity, for extrusion blow-moulding. This grade offers a good processing
behaviour, high impact resistance even at low temperature and high barrier properties especially to fluids such as fuels and oils, as well as
a high toughness.

Previously TECHNYL C 548B BLACK

TECHNYL STAR S 216 V30 NC

TECHNYL STAR S 216 V30 NC is based on a patented high flow polyamide 6 resin (TechnylStar), reinforced with 30% of glass fibre, for
injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant productivity improvement and allows more
freedom in mould and part design versus a standard polyamide solutions.

TECHNYL STAR S 216 V35 NC

TECHNYL STAR S 216 V35 NC is based on a patented high flow polyamide 6 resin (TechnylStar), reinforced with 35% of glass fibre, for
injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant productivity improvement and allows more
freedom in mould and part design versus a standard polyamide solutions.

TECHNYL STAR S 216 V50 BK 21N

Polyamide 6, 50% glass fiber reinforced, high flowability, improved surface finish, for injection moulding.

Previously DOMAMID VHF 6G50 BK999

TECHNYL STAR S 216L1 V30 BK 3N

TECHNYL STAR S 216L1 V30 GY BK 3N is based on a patented high flow polyamide 6 resin (TechnylStar), reinforced with 30% of glass fibre,
UV stabilized, for injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant productivity improvement
and allows more freedom in mould and part design versus a standard polyamide solutions.

TECHNYL STAR S 216L1 V30 GY 2319N

TECHNYL STAR S 216L1 V30 GY 2319N is based on a patented high flow polyamide 6 resin (TechnylStar), reinforced with 30% of glass fibre,
UV stabilized, for injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant productivity improvement
and allows more freedom in mould and part design versus a standard polyamide solutions.

TECHNYL STAR S 216L2 V30 BK

TECHNYL STAR S 216L2 V30 Black is based on a patented high flow polyamide 6 resin (TechnylStar), UV stabilized, reinforced with 30% of
glass fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant productivity improvement and
allows more freedom in mould and part design versus a standard polyamide solutions.

TECHNYL STAR S 218 MT40 NC

TECHNYL STAR S 218 MT40 NC is based on a patented high flow polyamide 6 resin (TechnylStar), reinforced with 40% mineral filler, heat
stabilized, for injection moulding. This grade offers good mechanical properties and is characterized by a high fluidity of the melt.

TECHNYL STAR S 218 MZ20 V10 BK 2N

TECHNYL STAR S 218 MZ20 V10 BK 2N is based on a patented high flow polyamide 6 resin (TechnylStar), heat stabilized, reinforced with 20%
of mineral filler and 10% of glass fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant
productivity improvement and allows more freedom in mould design and part design versus standard polyamide solution.

TECHNYL STAR S 218 V30 BK 31N

TECHNYL STAR S 218 V30 BK 31N is based on a patented high flow polyamide 6 resin (TechnylStar), heat stabilized, reinforced with 30% of
glass fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant productivity improvement and
allows more freedom in mould and part design versus a standard polyamide solutions.

TECHNYL STAR S 218 V30 NC

TECHNYL STAR S 218 V30 NC is based on a patented high flow polyamide 6 resin (TechnylStar), heat stabilized, reinforced with 30% of glass
fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant productivity improvement and allows
more freedom in mould and part design versus a standard polyamide solutions.

TECHNYL STAR S 218 V35 BK 31N

TECHNYL STAR S 218 V35 BK 31N is based on a patented high flow polyamide 6 resin (TechnylStar), heat stabilized, reinforced with 35% of
glass fibre, for injection moulding. Due to its outstanding flow characteristics, this grade provides a significant productivity improvement and
allows more freedom in mould and part design versus a standard polyamide solutions.

TECHNYL STAR S 218 V35 NC

TECHNYL STAR S 218 V35 NC is based on a patented high flow polyamide 6 resin (TechnylStar), heat stabilized, reinforced with 35% of glass
fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant productivity improvement and allows
more freedom in mould and part design versus a standard polyamide solutions.

TECHNYL STAR S 219 V30 NC

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, high flowability, improved surface finish, for injection moulding.

Previously DOMAMID VHF 6G30H1

TECHNYL STAR S 219 V30 WT 1128

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, high flowability, improved surface finish, for injection moulding.

Previously DOMAMID VHF 6G30H1

TECHNYL STAR S 52G1 MX25 GY 2408

TECHNYL STAR S 52G1 MX25 GY 2408 is a grade based on a non-phosphorous and non-halogenated flame retardant system and on a
patented high flow polyamide 6 resin (TechnylStar), reinforced of 25% of mineral filler, for injection moulding. This grade offers a high
fluidity as well as a robust glow wire resistance.

TECHNYL STAR S 60X1 V30 BK 15N

TECHNYL STAR S 60X1 V30 BK 15N is a grade based on a non-halogenated flame retardant system and on a patented high flow polyamide 6
resin (TechnylStar), reinforced of 30% of glass fiber, heat stabilized, for injection moulding. This grade is Heat stabilized and provides
optimized injection moulding performance.

TECHNYL STAR S 60X1 V30 GY 2408 CF

TECHNYL STAR S 60X1 V30 GY 2408 CF is a grade based on a non-halogenated flame retardant system and on a patented high flow
polyamide 6 resin (TechnylStar), reinforced of 30% of glass fiber, heat stabilized, for injection moulding. This grade is heat stabilized and
provides optimized injection moulding performance.

TECHNYL STAR S 60X1 V30 GY 2530 CF
TECHNYL STAR S 60X1 V30 GY 2635

TECHNYL STAR S 60X1 V30 GY 2635 is a grade based on a non-halogenated flame retardant system and on a patented high flow polyamide
6 resin (TechnylStar), reinforced of 30% of glass fiber, heat stabilized, for injection moulding. This grade is heat stabilized and provides
optimized injection moulding performance.

TECHNYL STAR S 60X1 V30 GY R7011

TECHNYL STAR S 60X1 V30 GY R7011 is a grade based on a non-halogenated flame retardant system and on a patented high flow polyamide
6 resin (TechnylStar), reinforced of 30% of glass fiber, heat stabilized, for injection moulding. This grade is heat stabilized and provides
optimized injection moulding performance.

TECHNYL STAR S 60X1 V30 GY R7016 CF

TECHNYL STAR S 60X1 V30 GY R7016 CF is a grade based on a non-halogenated flame retardant system and on a patented high flow
polyamide 6 resin (TechnylStar), reinforced of 30% of glass fiber, heat stabilized, for injection moulding. This grade is heat stabilized and
provides optimized injection moulding performance.

TECHNYL STAR S 60X1 V30 WT 2656LPU

TECHNYL STAR S 60X1 V30 WT 2656LPU is a grade based on a non-halogenated flame retardant system and on a patented high flow
polyamide 6 resin (TechnylStar), reinforced of 30% of glass fiber, heat stabilized, laser markable, for injection moulding. This grade is heat
stabilized and provides optimized injection moulding performance.

TECHNYL STAR S 60X2 V30 BK 1N

TECHNYL STAR S 60X2 V30 BK 1N is a grade based on a non-halogenated flame retardant system and on a patented high flow polyamide 6
resin (Technyl Star), reinforced of 30% of glass fiber, heat stabilized, for injection moulding. This grade is heat stabilized, provides optimized
injection moulding performance and blooming reduction.

Previously TECHNYL STAR XS 1680 BLACK 1N

TECHNYL STAR SX 216 V50 NC

TECHNYL STAR SX 216 V50 NC is based on a patented high flow polyamide 6 resin (Technylstar), reinforced with 50% of glass fibre, for
injection moulding. Due to its outstanding flow caracteristics, this grade allows more freedom in mould and part design versus a standard
polyamide solutions.

TECHNYL STAR SX 216 V60 NC

TECHNYL STAR SX 216 V60 NC is based on a patented high flow polyamide 6 resin (Technylstar), reinforced with 60% of glass fibre, for
injection moulding. Due to its outstanding flow caracteristics, this grade allows more freedom in mould and part design versus a standard
polyamide solutions.

TECHNYL STAR SX 218 V60 BK Z

TECHNYL STAR SX 218 V60 BK Z is based on a patented high flow polyamide 6 resin (Technylstar), heat stabilized, reinforced with 60% of
glass fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade allows more freedom in mould and part design
versus a standard polyamide solutions.

TECHNYL STAR SX 218 V60 NC

TECHNYL STAR SX 218 V60 NC is based on a patented high flow polyamide 6 resin (Technylstar), heat stabilized, reinforced with 60% of glass
fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade allows more freedom in mould and part design versus a
standard polyamide solutions.

TECHNYL XC 1952 GY2719

TECHNYL XC 1952 GY 2719 is a polyamide 6 based on a non-phosphorous and non-halogenated flame retardant system, reinforced with
25% of glass fillers, heat stabilized and suitable for injection moulding. This flame retardant grade showcases excellent moulding and
electrical performance as this grade is being rated at 1 kV for IPT (Inclined plane tracking).
This grade offers a unique polyamide HFFR combination, being UL Yellow card listed with all RTI ratings available from 0.8 to 3.0 mm
thickness & having 20% of recycled glass filler coming from Post-Industrial (PIR) & Post-Consumer (PCR) waste scraps. It consequently offers
a unique sustainable polyamide solution for Electrical & Electronic applications needing UL certification. This recycled grade being
furthermore EN 45545-2 certified for R22 & R23.

TECHNYL SLIDE C 216 V30 Y10 NC

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

Previously DOMAMID L 6G30Y10

TECHNYL SLIDE C 216 V50 Y10 NC

Polyamide 6, 50% glass fiber reinforced, for injection moulding.

Previously DOMAMID L 6G50Y10

TECHNYL 4EARTH C1E 216L2 V30 BK H

Polyamide 6, 30% glass fiber reinforced, UV-stabilized, for injection moulding.

Previously ECONAMID ORO 6G30UV3 114 BK

TECHNYL 4EARTH C2E 216 V15 BK H

Polyamide 6, 15% glass fiber reinforced, for injection moulding, black.

Previously ECONAMID FL 6G15 BK

TECHNYL 4EARTH C2E 216 V30 BK 9039

Polyamide 6, 30% glass fiber reinforced, for injection moulding, black.

Previously ECONAMID PLUS 6G30 BK99039

TECHNYL 4EARTH C2E 216 V40 BK

Polyamide 6, 40% glass fiber reinforced, for injection moulding, black.

Previously ECONAMID PLUS 6G40 BK

TECHNYL 4EARTH C2E 216 V50 BK H

Polyamide 6, 50% glass fiber reinforced, for injection moulding, black.

Previously ECONAMID PLUS 6G50 BK

TECHNYL 4EARTH C2E 238 V15 BK

Polyamide 6, 15% glass fiber reinforced, heat-aging stabilized, for injection molding, black.

Previously ECONAMID PLUS 6G15I1H2 BK

TECHNYL 4EARTH C5E 216M BK

Polyamide 6, improved impact resistance, for injection moulding.

Previously ECONAMID PLUS 6 500 BK

TECHNYL 4EARTH C5E 216M GY R7035

Polyamide 6, improved impact resistance, for injection moulding.

Previously ECONAMID PLUS 6 500 GYR7035

TECHNYL C 116 RD 3113

Polyamide 6, improved flowability, for injection moulding.

Previously DOMAMID 6LV RD33113

TECHNYL C 116 V15 NC

Polyamide 6, 15% glass fiber reinforced, improved flowability, for injection moulding.

Previously DOMAMID 6LVG15 NC

TECHNYL C 116 V30 BK 9265

Polyamide 6, 30% glass fiber reinforced, improved flowability, for injection moulding.

Previously DOMAMID 6LVG30 300 BK99265

TECHNYL C 116S BK 21N

Polyamide 6, improved flowability, for injection moulding, black.

Previously DOMAMID 6LV 302 BK999

TECHNYL C 116S V35 BK 21N

Polyamide 6, 35% glass fiber reinforced, improved surface finish, for injection molding, black.

Previously DOMAMID 6LVG35 403 BK99

TECHNYL C 118 M20 V10 BK

Polyamide 6, 30% glass fiber and mineral filler, heat-aging stabilized, improved flowability, for injection moulding, black.

Previously DOMAMID 6LVGM3010H2 BK

TECHNYL C 118 MX30 BK

Polyamide 6, 30% mineral filler, heat-aging stabilized, improved flowability, for injection moulding, black.

Previously DOMAMID 6LVT30H2 BK

TECHNYL C 118 V30 BK

TECHNYL C 118 V30 BK is a polyamide 6, reinforced with 30% of glass fiber, heat stabilized, for injection moulding.

TECHNYL C 119 V30 GY R7012

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, improved flowability, for injection moulding.

Previously DOMAMID 6LVG30H1

TECHNYL C 119L1 V30 ORANGE 2130

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, UV-stabilized, improved flowability, for injection moulding.

Previously DOMAMID 6LVG30H1UV1 EMK

TECHNYL C 216 BK

TECHNYL C 216 BK is an unreinforced polyamide 6, standard nucleation for fast cycling, for injection moulding. This grade offers a high
fluidity and good mould release.

TECHNYL C 216 S10 V20 BK

Polyamide 6, 30% glass fiber and glass beads, for injection moulding.

Previously DOMAMID 6GB3020 BK

TECHNYL C 216 S15 NC

Polyamide 6, 15% glass beads, for injection moulding.

Previously DOMAMID 6B15 NC

TECHNYL C 216 S15 V15 BK 9264

Polyamide 6, 30% glass fiber and glass beads, for injection moulding.

Previously DOMAMID 6GB3015 BK99264

TECHNYL C 216 S15 V15 NC

Polyamide 6, 30% glass fiber and glass beads, for injection moulding.

Previously DOMAMID 6GB3015 NC

TECHNYL C 216 S20 V10 BK

Polyamide 6, 30% glass fiber and glass beads, for injection moulding, black.

Previously DOMAMID 6GB3010 300 BK

TECHNYL C 216 S30 GN 6070

Polyamide 6, 30% glass beads, for injection moulding.

Previously DOMAMID 6B30 GN6607

TECHNYL C 216 S50 NC

Polyamide 6, 50% glass beads, for injection moulding.

Previously DOMAMID 6B50

TECHNYL C 216 V30 BK 9275

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G30 BK99275

TECHNYL C 216 V30 BK Z/4

TECHNYL C 216 V30 BK Z/4 is a polyamide 6, reinforced with 30% of glass fibre, for injection moulding. This grade has good mechanical
properties and offering an excellent combination between thermal and mechanical properties.

TECHNYL C 216 V30 GN 6022 XB

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G30 GN66022XB

TECHNYL C 216 V30 GY G1836 CF

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

TECHNYL C 216 V35 GY R7040 XB

Polyamide 6, 35% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G35 GYR7040XB

TECHNYL C 216 WT R9000 XB

Polyamide 6, for injection moulding.

Previously DOMAMID 6 605

TECHNYL C 216MSI NC

Polyamide 6, low temperature impact modified, for injection moulding, natural color.

Previously DOMAMID 6IK1 302 NC

TECHNYL C 218 MB40 V20 BK

Polyamide 6, 60% glass fiber and mineral filler, heat-aging stabilized, for injection moulding, black.

Previously DOMAMID 6GM6020H2 211 BK

TECHNYL C 218 S30 BK

Polyamide 6, 30% glass beads, heat-aging stabilized, for injection moulding, black.

Previously DOMAMID 6B30H2 BK

TECHNYL C 218 V15 NC

Polyamide 6, 15% glass fiber reinforced, heat-aging stabilized, for injection moulding, natural color.

Previously DOMAMID 6G15H2 NC

TECHNYL C 218 V30 BK

TECHNYL C 218 V30 BK is a polyamide 6, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. The product offers an
excellent combination between thermal and mechanical properties.

TECHNYL C 218 V30 BK 9258 D

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, for injection molding.

Previously DOMAMID 6G30H2 BK99258

TECHNYL C 218 V30 BK 9262 D

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, for injection molding.

Previously DOMAMID 6G30H2 BK99262

TECHNYL C 218 V30 BK 9308 D

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, for injection molding, black.

Previously DOMAMID 6G30H2 BK99308

TECHNYL C 218 V60 BK 9275

Polyamide 6, 60% glass fiber reinforced, heat-aging stabilized, improved flowability, for injection molding.

Previously DOMAMID 6LVG60H2 BK99275

TECHNYL C 218M NC

Polyamide 6, heat-aging stabilized, impact modified, for injection moulding, natural color.

Previously DOMAMID 6I1H2 NC

TECHNYL C 219 MT30 GY R7001

Polyamide 6, 30% mineral filler, heat-aging stabilized, for injection moulding.

Previously DOMAMID 6M30H

TECHNYL C 219 V15 NC

Polyamide 6, 15% glass fiber reinforced, heat-aging stabilized, for injection moulding.

Previously DOMAMID 6G15H1 N

TECHNYL C 219ML1 ORANGE 2130

Polyamide 6, heat-aging stabilized, UV-stabilized, impact modified, for injection moulding.

Previously DOMAMID 6I1H1UV1 EMK

TECHNYL C 219S V35 BK 21N

Polyamide 6, 35% glass fiber reinforced, heat-aging stabilized, for injection moulding.

Previously DOMAMID 6G35H1 BK

TECHNYL C 236 V20 NC

Polyamide 6, 20% glass fiber reinforced, improved impact resistance, for injection moulding.

Previously DOMAMID 6G20 500

TECHNYL C 238 BK

Polyamide 6, heat-aging stabilized, impact modified, for injection moulding, black.

Previously DOMAMID 6I3H2 BK

TECHNYL C 238 V15 BK

Polyamide 6, 15% glass fiber reinforced, heat-aging stabilized, for injection moulding, black.

Previously DOMAMID 6G15H2 202 BK

TECHNYL C 238SI V10 BK 9177

Polyamide 6, 10% glass fiber reinforced, heat-aging stabilized, low temperature impact modified, for injection moulding.

Previously DOMAMID 6G10IK2H2 BK99177

TECHNYL C 239L1 BK 9288 LP

Polyamide 6, heat-aging stabilized, UV-stabilized, impact modified, lasermarkable, for injection moulding.

Previously DOMAMID 6I2LS3LH1UV1 BK99288

TECHNYL C 246 NC

TECHNYL C 246 NC is an unfilled polyamide 6, impact modified , for injection moulding. This grade offers high impact strength, flexibility and
good surface aspect.

TECHNYL C 246SI V30 NC

TECHNYL C 246SI V30 NC is a polyamide 6 reinforced with 30% of glass fiber, with improved impact resistance, for injection moulding. This
grade offers high impact strength and good mechanical properties.

TECHNYL C 246SIL1 BK

Polyamide 6, UV-stabilized, low temperature impact modified, for injection moulding.

Previously DOMAMID 6IK4UV1 BK

TECHNYL C 249SIL1 V30 ORANGE 2130

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, UV-stabilized, low temperature impact modified, for injection moulding.

Previously DOMAMID 6G30IK1H1UV1 EMK

TECHNYL C 256 V18 NC

TECHNYL C 256 V18 NC is a polyamide PA 6 impact modified, reinforced with 18% of glass fibre, for injection moulding. This grade offers
high impact strength and good mechanical properties.

Previously TECHNYL C 256 V18 (EX PSB 197) NATURAL

TECHNYL C 259SI V15 BK 9281

Polyamide 6, 15% glass fiber reinforced, heat-aging stabilized, low temperature impact modified, for injection moulding.

Previously DOMAMID 6G15IK3H1 BK99281

TECHNYL C 319 NC XB

Polyamide 6, heat-aging stabilized, medium viscosity, for injection moulding.

Previously DOMAMID 6MVH1

TECHNYL C 336SI NC

Polyamide 6, low temperature impact modified, medium viscosity, for injection moulding, natural color.

Previously DOMAMID 6MVIK2 N

TECHNYL CR 236 SI S20 BK

Polyamide 6, 20% glass beads, low temperature impact modified, for injection moulding, black.

Previously DOMAMID 6B20IK2 103 BK

TECHNYL PROTECT C 60G1 V15 BK

Polyamide 6, 15% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding.

Previously DOMAMID FR 6G15V0E BK

TECHNYL PROTECT C 60G1 V15 NC

Polyamide 6, 15% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding.

Previously DOMAMID FR 6G15V0E NC

TECHNYL PROTECT C 60G1 V30 BK

Polyamide 6, 30% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding,
black.

Previously DOMAMID FR 6G30V0E BK

TECHNYL PROTECT C 60G1 V30 BK R9005

Polyamide 6, 30% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding,
black.

Previously DOMAMID FR 6G30V0E BKR9005

TECHNYL SAFE C 216FC V15 BK

TECHNYL SAFE C 216FC V15 BK is a polyamide 6, 15% glass fiber reinforced, food contact approved for injection moulding. Designed to be
used in food contact in industrial consumer good as well as appliance applications.

Previously DOMAMID 6G15FC

TECHNYL SAFE C 216FC V15 NC

TECHNYL SAFE C 216FC V15 NC is a polyamide 6, 15% glass fiber reinforced, food contact approved for injection moulding. Designed to be
used in moulded parts requiring food contact compliance in industrial, consumer good as well as appliance applications.

Previously DOMAMID 6G15FC 300 NC

TECHNYL SAFE C 216FC V50 NC

TECHNYL SAFE C 216FC V50 NC is a polyamide 6, 50% glass fiber reinforced, food contact approved for injection moulding. Designed to be used in
moulded part requiring good mechanical properties and food contact compliance in industrial consumer good as well as appliance
applications.

Previously DOMAMID 6G50FC 300 NC

TECHNYL SAFE C 216FFC NC XB

TECHNYL SAFE C 216FFC NC XB is a polyamide 6, unfilled, food contact approved for injection moulding. Designed to be used in moulded
parts requiring fast cycling injection moulding, food contact compliance in industrial, consumer good as well as appliance applications.

Previously DOMAMID S 6FC NC

TECHNYL SAFE C 216WFC V30 NC

TECHNYL SAFE C 216WFC V30 NC is a polyamide 6, 30% glass fibre reinforced, food contact and drinking water approved, for injection
moulding. Designed to be used in moulded part requiring good stiffness and hydrolysis resistance in consumer & industrial goods as well as
appliances in contact with drinking water. WRAS approval at 85°C.

TECHNYL SAFE C 216WFC V50 NC

TECHNYL SAFE C 216WFC V50 NC is a polyamide 6, 50% glass fibre reinforced, food contact and drinking water approved, for injection
moulding. Designed to be used in moulded part requiring improved stiffness, dimensional stability and hydrolysis resistance versus PA6GF30
in consumer & industrial goods as well as appliances in contact with drinking water. WRAS approval at 85°C.

TECHNYL SAFE C 316FC NC

TECHNYL SAFE C 316FC NC is a polyamide 6, unfilled, medium viscosity, food contact approved for injection moulding and extrusion.
Designed to be used in parts requiring food contact compliance in industrial consumer goods applications as well as appliance
applications.

Previously DOMAMID 6MVFC

TECHNYL SAFE C216FC S30 NC

TECHNYL SAFE C216FC S30 NC is a polyamide 6, 30 % glass beads reinforced, food contact approved for injection moulding. Designed to be
used for food contact in industrial consumer good applications as well as appliance applications requiring excellent surface finish and low
warpage.

Previously DOMAMID 6B30FC

TECHNYL SHAPE C 448CR BK

Polyamide 6, heat-aging stabilized, hydrolisis stabilized, impact modified, high viscosity, for extrusion of pipes, black.

Previously DOMAMID 6HVI4H2HR2 BK

TECHNYL 4EARTH C2E 216M GY R7035

Polyamide 6, impact modified, for injection moulding, black.

Previously ECONAMID PLUS 6I1 401 GYR7035

TECHNYL 4EARTH C2E 218 V40 BK

Polyamide 6, 40% glass fiber reinforced, heat-aging stabilized, for injection moulding, black.

Previously ECONAMID PLUS 6G40H2 BK

TECHNYL C 119 V30 WT 1128 XB

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, improved flowability, for injection moulding.

Previously DOMAMID 6LVG30H1 WT91128XB

TECHNYL C 219 V35 GY 7196

Polyamide 6, 35% glass fiber reinforced, heat-aging stabilized, for injection moulding

TECHNYL C 219S V30 BK 21N

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, for injection moulding.

Previously DOMAMID 6G30H1 BK99

TECHNYL C 316 NC

Polyamide 6, medium viscosity, for injection moulding, natural color.

Previously DOMAMID 6MV 303 NC

TECHNYL PROTECT C 52G1 MX25 GY 7035

TECHNYL PROTECT C 52G1 MX25 GY 7035 is a polyamide 6 based on a non-phosphorous and Non-halogenated flame retardant system,
reinforced with 25% of mineral filler, heat stabilized, for injection moulding. This phosphorus and halogen free flame retardant grade offers
a robust glow wire resistance.

TECHNYL PROTECT C 52G2 MV25 GY 1783CF

TECHNYL PROTECT C 52G2 MV25 GY 1783CF is a polyamide 6 based on a non-phosphorous and Non-halogenated flame retardant system,
reinforced with 25% of mixed glass fibre and mineral filler, heat stabilized, for injection moulding. This flame retardant grade offers a low
smoke toxicity, a high glow-wire resistance and good all round mechanical properties.

Previously TECHNYL C 52G2 MV25 GREY G 1783 CF

TECHNYL PROTECT C 52G2 WT 1155

Polyamide 6 unfilled, for fire and electrical overall properties, with improved flowability, for injection moulding.

Previously DOMAMID 6LVGT85 WT91155

TECHNYL PROTECT C 60 S30 GY R7001

Polyamide 6, 30% glass beads, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding.

Previously DOMAMID FR 6B30V0E 124

TECHNYL SAFE C 216FCPW NC

TECHNYL SAFE C 216FCPW NC is a polyamide 6, unfilled, in powder form , food contact approved for rotational moulding .Designed to be
used in moulded parts requiring food contact compliance in industrial consumer good as well as appliance applications.

Previously DOMAMID PW 6FC NC

TECHNYL SAFE C 216WFC V30 BK

TECHNYL SAFE C 216WFC V30 BK is a polyamide 6, 30% glass fibre reinforced, food contact and drinking water approved, for injection
moulding. Designed to be used in moulded part requiring good stiffness and hydrolysis resistance in consumer & industrial goods as well as
appliances in contact with drinking water. WRAS approval at 85°C.

TECHNYL SAFE C 216WFC V50 BK

TECHNYL SAFE C 216WFC V50 BK is a polyamide 6, 50% glass fibre reinforced, food contact and drinking water approved, for injection
moulding. Designed to be used in moulded part requiring improved stiffness, dimensional stability and hydrolysis resistance versus PA6GF30
in consumer & industrial goods as well as appliances in contact with drinking water. WRAS approval at 85°C.

TECHNYL SHAPE C 402 NC

Polyamide 6, high viscosity, for injection moulding.

Previously DOMAMID 6HV NC01

TECHNYL C 116S V30 BK 21N

Polyamide 6, 30% glass fiber reinforced, improved flowability, for injection moulding, black.

Previously DOMAMID 6LVG30 300 BK99

TECHNYL C 119 V30 BL 5129 XB

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, improved flowability, for injection moulding.

Previously DOMAMID 6LVG30H1

TECHNYL C 216 V20 BK 21NS

Polyamide 6, 20% glass fiber reinforced, for injection moulding, black.

Previously DOMAMID 6G20 202 BK

TECHNYL C 216 V30 BK

Polyamide 6, 30% glass fiber reinforced, for injection moulding, black.

Previously DOMAMID 6G30 300 B

TECHNYL C 216 V30 BK 103 D

Polyamide 6, 30% glass fiber reinforced, for injection moulding, black.

Previously DOMAMID 6G30 103 BK

TECHNYL C 216 V30 NC 923 D

Polyamide 6, 30% glass fiber reinforced, for injection moulding, natural color.

Previously DOMAMID 6G30 923 NC

TECHNYL C 216 V45 BK 34N

TECHNYL C 216 V45 BK 34N is a polyamide 6, reinforced with 45% of glass fibre, for injection moulding. This grade has been optimized to
have good impact strength, a nice surface aspect and being easy to paint.

TECHNYL C 216L2 V30 BK

Polyamide 6, 30% glass fiber reinforced, UV-stabilized, for injection moulding.

Previously DOMAMID 6G30UV2 BK

TECHNYL C 219 V35 RD 3140

Polyamide 6, 35% glass fiber reinforced, heat-aging stabilized, for injection moulding.

TECHNYL PROTECT C 52G4 MZ25 GY R7035

ECHNYL PROTECT C 52G4 MZ25 GY R7035 is a polyamide 6 based on a non-phosphorous and Non-halogenated flame retardant system,
reinforced with 25% of mineral filler, heat stabilized, for injection moulding. This grade offers a robust glow wire resistance, combined with
enhanced processing behavior suitable for thin wall parts.

Previously TECHNYL C 52G4 MZ25 GREY R7035

TECHNYL SAFE C 226FFC NC

TECHNYL SAFE C 226FFC NC is a polyamide 6, unfilled ,improved flowability, food contact approved for injection moulding. Designed for
very fast cycling injection moulding to be used in food contact in industrial consumer good as well as appliance applications..

Previously DOMAMID 6N2FC NC

TECHNYL 4EARTH C2E 216 GY R7035

Polyamide 6, for injection moulding.

Previously ECONAMID PLUS 6 GYR7035

TECHNYL 4EARTH C2E 216 WT R9016

Polyamide 6, for injection moulding.

Previously ECONAMID PLUS 6 WTR9016

TECHNYL 4EARTH C2E 219 MT20 V10 BK

Polyamide 6, 30% glass fiber and mineral filler, heat-aging stabilized, for injection moulding, black.

Previously ECONAMID PLUS 6GM3010H1 BK

TECHNYL 4EARTH C5E 216M BK H

Polyamide 6, improved impact resistance, for injection moulding, black.

Previously ECONAMID FL 6 500 BK

TECHNYL C 116 GY R7035 XB

Polyamide 6, improved flowability, for injection moulding.

Previously DOMAMID 6LV GYR7035XB

TECHNYL C 116 V35 GY 7270

Polyamide 6, 35% glass fiber reinforced, improved flowability, for injection moulding.

Previously DOMAMID 6LVG35 GY77270

TECHNYL C 116 V35 WT 1146

Polyamide 6, 35% glass fiber reinforced, improved flowability, for injection moulding.

Previously DOMAMID 6LVG35 WT91146

TECHNYL C 216 BK 9253

Polyamide 6, heat-aging stabilized, for injection moulding, black.

Previously DOMAMID 6 605 BK9925

TECHNYL C 216 MT30 NC

TECHNYL C 216 MT30 NC is a polyamide 6, reinforced with 30% of mineral filler, for injection moulding. The isotropic shrinkage and the
good dimensional stability make it adequate for every kind of application in which the planarity of the part is important.

Previously DOMAMID 6M30 NC

TECHNYL C 216 S30 BK

Polyamide 6, 30% glass beads, for injection moulding, black.

Previously DOMAMID 6B30 300 BK

TECHNYL C 216 S30 BK R9011 XB

Polyamide 6, 30% glass beads, for injection moulding.

Previously DOMAMID 6B30 BKR9011XB

TECHNYL C 216 S30 GY 7446

Polyamide 6, 30% glass beads, for injection moulding.

Previously DOMAMID 6B30 GY77446

TECHNYL C 216 S30 GY 7470

Polyamide 6, 30% glass beads, for injection moulding.

Previously DOMAMID 6B30 GY77470

TECHNYL C 216 V15 BK 9293

Polyamide 6, 15% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G15 BK99293

TECHNYL C 216 V25 BK

Polyamide 6, 25% glass fiber reinforced, for injection moulding, black.

Previously DOMAMID 6G25 300 BK

TECHNYL C 216 V30 BK 9293

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G30 BK99293

TECHNYL C 216 V30 BK F808

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G30 BK9F808

TECHNYL C 216 V30 BL R5010

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G30 BLR5010

TECHNYL C 216 V30 GY 7471

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G30 GY77471

TECHNYL C 216 V30 GY 7517

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G30 GY77517

TECHNYL C 216 V30 GY 7527

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G30 GY77527

TECHNYL C 216 V30 GY F650 XB

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G30 GY7F650X

TECHNYL C 216 V30 GY R7024

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

Previously DOMAMID 6G30 GYR7024

TECHNYL C 216 V30 WT 1123

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

(Previously DOMAMID 6G30 WT91123)

TECHNYL C 216 V30 WT R9010 BL

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

(Previously DOMAMID 6G30 WTR9010BL)

TECHNYL C 216MF NC

Polyamide 6, impact modified, for injection moulding, natural color.

(Previously DOMAMID 6I1 508 NC)

TECHNYL C 219 MX30 NC

Polyamide 6, 30% mineral filler, heat-aging stabilized, for injection moulding.

(Previously DOMAMID 6T30H1 NC)

TECHNYL C 219 V30 BK 9258

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, for injection moulding.

(Previously DOMAMID 6G30H1 BK99258)

TECHNYL C 219 V30 WT 1175

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, for injection molding.

(Previously DOMAMID 6G30H1 WT91175)

TECHNYL C 230 NC

TECHNYL C 230 NC is an unreinforced polyamide 6, with improved impact resistance, for injection moulding. This grade offers improved
impact strength and higher flexibility. The grade is designed to make technical parts having small or medium sizeThis product is available in
natural color.

TECHNYL C 236 V35 BK Z

TECHNYL C 236 V35 BK Z is a polyamide 6 reinforced with 35% of glass fiber, with improved impact resistance, for injection moulding. This
grade offer a high impact strength and good mechanical properties.

TECHNYL C 246F BK

Polyamide 6, low temperature impact modified, for injection moulding, black.

(Previously DOMAMID 6IK4 301 BK)

TECHNYL C 246F NC

Polyamide 6, low temperature impact modified, for injection moulding, natural color.

(Previously DOMAMID 6IK4 303 NC)

TECHNYL C 246SI V40 NC

Polyamide 6, 40% glass fiber reinforced, low temperature impact modified, for injection moulding, natural color.

(Previously DOMAMID 6G40IK1 NC)

TECHNYL PROTECT C 50H1 BG R1013

Polyamide 6, heat-aging stabilized, halogen and red phosphorus free flame retardant, for injection moulding.

(Previously DOMAMID FR 6V0M BGR1013)

TECHNYL PROTECT C 50H1 BK

Polyamide 6, heat-aging stabilized, halogen and red phosphorus free flame retardant, for injection moulding.

(Previously DOMAMID FR 6V0M BK)

TECHNYL PROTECT C 50H1 GY 7371

Polyamide 6, heat-aging stabilized, halogen and red phosphorus free flame retardant, for injection moulding.

(Previously DOMAMID FR 6V0M GY77371)

TECHNYL PROTECT C 50H1 GY R7035

Polyamide 6, heat-aging stabilized, halogen and red phosphorus free flame retardant, for injection moulding.

(Previously DOMAMID FR 6V0M GYR7035)

TECHNYL PROTECT C 50H1 NC

Polyamide 6, heat-aging stabilized, halogen and red phosphorus free flame retardant, for injection moulding.

(Previously DOMAMID FR 6V0M NC)

TECHNYL PROTECT C 50H1 WT 1135XB

Polyamide 6, heat-aging stabilized, halogen and red phosphorus free flame retardant, for injection moulding.

(Previously DOMAMID FR 6V0M WT91135XB)

TECHNYL PROTECT C 50H2 BK 46N

TECHNYL PROTECT C 50H2 BK 46N is an unreinforced polyamide 6 based on a non-phosphorous and non-halogenated flame retardant
system, heat stabilized, for injection moulding. This product, UL94 V0 @ 0,4mm, offers excellent moldability together with good stiffness.

(Previously TECHNYL C 50H2 BLACK 46N)

TECHNYL PROTECT C 50H2 NC

TECHNYL PROTECT C 50H2 NC is an unreinforced polyamide 6 based on a non-phosphorous and non-halogenated flame retardant system,
heat stabilized, for injection moulding. This product, UL94 VO @ 0,4mm, offers excellent moldability together with good stiffness.

(Previously TECHNYL C 50H2 NATURAL)

TECHNYL PROTECT C 52G1 V20 GY R7035 CF

TECHNYL PROTECT C 52G1 V20 GY R7035 CF is a polyamide 6 based on a non-phosphorous and non-halogenated flame retardant system,
reinforced with 20% of glass fiber, heat stabilized, for injection moulding. This is a flame retardant grade with excellent moulding and
electrical performance.

(Previously TECHNYL C 52G1 V20 GREY R7035 CF)

TECHNYL PROTECT C 52G2 BG 2166

Polyamide 6 unfilled, for fire and electrical overall properties, with improved flowability, for injection moulding.

(Previously DOMAMID 6LVGT85 BG12166)

TECHNYL PROTECT C 52G2 BK 9307

Polyamide 6 unfilled, for fire and electrical overall properties, with improved flowability, for injection moulding.

(Previously DOMAMID 6LVGT85 BK99307)

TECHNYL PROTECT C 52G3 V25 NC

Polyamide 6, 25% glass fiber reinforced, heat-aging stabilized, for injection moulding.

(Previously DOMAMID FR 6G25GT96M NC)

TECHNYL 4EARTH C1E 316 V30 BK H

Polyamide 6, 30% glass fiber reinforced, for injection moulding.

(Previously ECONAMID ORO 6G30 BK)

TECHNYL 4EARTH C2E 218 V30 BK H

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, for injection moulding, black.

(Previously ECONAMID FL 6G30H2)

TECHNYL 4EARTH C2E 218 V30 GY 7544

Polyamide 6, 30% glass fiber reinforced, heat-aging stabilized, for injection moulding.

(Previously ECONAMID PLUS 6G30H2 GY77544)

TECHNYL C 216 S30 GY R7031

Polyamide 6, 30% glass beads, for injection moulding.

(Previously DOMAMID 6B30 GYR7031)

TECHNYL C 216 V45 NC

TECHNYL C 216 V45 NC is a polyamide 6, reinforced with 45% of glass fibre, for injection moulding. This grade has been optimized to have
good impact strength, a nice surface aspect and being easy to paint.

TECHNYL C 216ML1 NC

Polyamide 6, UV-stabilized, improved impact resistance, for injection moulding, natural color.

(Previously DOMAMID 6UV1 500 NC)

TECHNYL C 216S V60 BK

Polyamide 6, 60% glass fiber reinforced, improved surface finish, for injection moulding, black.
TECHNYL C 216S V60 BK has been developped especially for gas molding and for those applications requiring painting, chrome plating or
high quality surface aspect. This material is polyamide 6 based compound, glass fiber reinforced 60%, with an amorphous PA matrix.

(Previously DOMAMID HCE 6G60 BK)

TECHNYL C 218 V15 BK

TECHNYL C 218 V15 BK is a polyamide 6, heat stabilized, reinforced with 15% of glass fiber, for injection moulding. The product offers an
excellent combination between thermal and mechanical properties.

TECHNYL C 246M NC

TECHNYL C 246M NC is an unreinforced polyamide 6, with high impact resistance, for injection moulding. This grade offers high impact
strength, flexibility and good surface aspect.

(Previously PSB 196 / DOMAMID 6I4 NC)

TECHNYL PROTECT C 50H1 YL 1170

Polyamide 6, heat-aging stabilized, halogen and red phosphorus free flame retardant, for injection moulding.

(Previously DOMAMID FR 6V0M YL11170)

TECHNYL SAFE C 216FC V35 BK

TECHNYL SAFE C 216FC V35 BK is a polyamide 6, 35% glass fiber reinforced, food contact approved for injection moulding. Designed to be
used in moulded parts requiring food contact compliance in industrial, consumer good as well as appliance applications.

(Previously DOMAMID 6G35FC 300 BK)

TECHNYL C 116 BL 5130

Polyamide 6, improved flowability, for injection moulding.

(Previously DOMAMID 6LV 100 BL55130)

TECHNYL C 219 MT25 V15 NC

Polyamide 6, 40% glass fiber and mineral filler, heat-aging stabilized, for injection moulding.

(Previously DOMAMID 6GM4015H1)

TECHNYL C 236 GN 6007 CF

Polyamide 6, for injection molding.

TECHNYL C 246SIL1 GN 6080

Polyamide 6, UV-stabilized, low temperature impact modified, for injection moulding.

(Previously DOMAMID 6IK4UV1 GN66080)

TECHNYL PROTECT C 30H1 V30 NC/F

TECHNYL PROTECT C 30H1 V30 NC/F is a flame retardant polyamide PA6, reinforced with 30% of glass fibre, for injection moulding. This
grade has good mechanical properties, flame retardant rating UL94 V0 and glow-wire at 960°C.

(Previously TECHNYL C 30H1 V30 NATURAL/F)

TECHNYL PROTECT C 52G3 V20 GY 7469 LP

Polyamide 6, 20% glass fiber reinforced, heat-aging stabilized, for injection moulding.