LDPE
Product has been added.
Pharmalene FC 20 PH
Pharmalene FC 20 PH is a low density polyethylene (LDPE) without additives obtained by high pressure
autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for
blown film extrusion, extrusion and extrusion blow moulding.
Pharmalene FL 20 PH
Pharmalene FL 20 PH is a low density polyethylene (LDPE) without additives obtained by high pressure
autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for
blown film extrusion, extrusion and extrusion blow moulding.
Pharmalene MP 20 PH
Pharmalene MP 20 PH is a medium fluidity low density polyethylene (LDPE) without additives, obtained by high
pressure autoclave process.
It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding and
extrusion coating.
Pharmalene MR 10 PH
Pharmalene MR 10 PH is a high fluidity low density polyethylene (LDPE) without additives, obtained by high
pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly
used for injection moulding and compounding.
Pharmalene MT 10 PH
Pharmalene MT 10 PH is a high fluidity low density polyethylene (LDPE) without additives, obtained by high
pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly
used for injection moulding and compounding.
Pharmalene MP 30 PH
Pharmalene MP 30 PH is a medium fluidity low density polyethylene (LDPE) without additives, obtained by high
pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly
used for injection moulding.
Pharmalene MP 31 PH
Pharmalene MP 31 PH is a medium fluidity low density polyethylene resin (LDPE) additivated with slip agent
and anti-block obtained by high pressure autoclave process.
It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding.
Pharmalene FC 20 PH BCA
Sustainable
Pharmalene FC 20 PH B
Sustainable
Pharmalene MP 20 PH BCA
Sustainable
Pharmalene FL 20 PH BCA
Sustainable
Pharmalene FL 20 PH BA
Sustainable
Pharmalene MR 10 PH BCA
Sustainable
Pharmalene MR 10 PH BA
Sustainable
Pharmalene MP 30 PH BCA
Sustainable
Pharmalene MP 20 PH BA
Sustainable
Pharmalene MP 30 PH BA
Sustainable
Pharmalene MP 31 PH BCA
Sustainable
Pharmalene MT 10 PH BC
Sustainable
Pharmalene MT 10 PH BA
Sustainable
Pharmalene MP 31 PH BA
Sustainable
Riblene AB 10
Riblene AB 10 is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film
extrusion.
Riblene AB 10 is characterized by a high melt strength leading to a good bubble stability during extrusion.
Films manufactured by Riblene AB 10 are easily heat shrinkable and characterized by optimum mechanical
properties.
Riblene FF 29
Riblene FF 29 is a high molecular weight low density polyethylene (LDPE), suitable for blown film extrusion.
Riblene FF 29 is characterised by a good melt strength leading to a good bubble stability during extrusion.
Films manufactured by Riblene FF 29 are easily heat shrinkable and characterised by good mechanical
properties.
Riblene FC 20
Riblene FC 20 is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film
extrusion.
Riblene FC 20 is characterised by a high melt strength leading to a good bubble stability during extrusion.
Films manufactured by Riblene FC 20 are easily heat shrinkable and characterised by optimum mechanical
properties.
Riblene FC 30
Riblene FC 30 is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film extrusion.
Riblene FC 30 is characterised by a high melt strength leading to a good bubble stability during extrusion.
Films manufactured by Riblene FC 30 are easily heat shrinkable and characterised by optimum mechanical
properties.
Riblene FC 39 F
Riblene FC 39 F is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion.
Riblene FC 39 F is characterised by a high melt strength leading to a good bubble stability during extrusion.
Films manufactured by Riblene FC 39 F are easily heat shrinkable and characterised by high rigidity, good
mechanical and optical properties.
Riblene FD 40
Riblene FD 40 F is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion.
Riblene FD 40 F has a good compromise between melt strenght and processability.
Riblene FF 30
Riblene FF 30 is a high molecular weight low density polyethylene (LDPE), suitable for blown film extrusion.
Riblene FF 30 is characterised by a good melt strength leading to a good bubble stability during extrusion.
Films manufactured by Riblene FF 30 have good optical properties, high shrink values and mechanical
properties.
Riblene FC 40 F
Riblene FC 40 F is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion.
Riblene FC 40 F is characterised by a high melt strength leading to a good bubble stability during extrusion.
Riblene FF 33
Riblene FF 33 is a high molecular weight low density polyethylene (LDPE), additivated with slip agent, ideal
for blown film extrusion. Riblene FF 33 is characterised by a good melt strength leading to a good bubble
stability during extrusion.
Riblene FL 20 R
Riblene FL 20 R is a low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FL 20 R is
characterised by a good balance between processability and mechanical properties.
Films manufactured by Riblene FL 20 R are easily heat shrinkable and have good optical properties.
Riblene FF 34 F
Riblene FF 34 F is a high molecular weight low density polyethylene (LDPE), additivated with slip and
antiblocking agent, suitable for blown film extrusion.
Riblene FF 34 F is characterised by a good melt strength leading to a good bubble stability during extrusion.
Films manufactured by Riblene FF 34 F are easily heat shrinkable and characterised by good mechanical
properties.
Riblene FF 34 I
Riblene FF 34 I is a high molecular weight low density polyethylene (LDPE), additivated with slip and
antiblocking agent, suitable for blown film extrusion.
Riblene FF 34 I is characterised by a good melt strength leading to a good bubble stability during extrusion.
Films manufactured by Riblene FF 34 I are easily heat shrinkable and characterised by good mechanical
properties.
Riblene FH 39 F
Riblene FH 39 F is a low density polyethylene (LDPE) suitable for blown film extrusion.
Riblene FH 39 F is characterised by a good balance between processability and mechanical properties. Films
manufactured by Riblene FH 39 F are easily heat shrinkable and have good optical and mechanical
properties.
Riblene FL 23 I
Riblene FL 23 I is a low density polyethylene (LDPE) additivated with slip agent, ideal for blown film extrusion.
Riblene FL 23 I is characterised by a good balance between processability and mechanical properties. Films
produced with Riblene FL 23 I are easily heat shrinkable and they show good optical and mechanical
properties.
Riblene FL 30 I
Riblene FL 30 I is a low density polyethylene (LDPE) ideal for blown film extrusion.
Riblene FL 30 I is characterised by a good balance between processability, mechanical and optical
properties. Films manufactured by Riblene FL 30 I are easily heat shrinkable.
Riblene FF 33 F
Riblene FF 33 F is a high molecular weight low density polyethylene (LDPE), additivated with slip agent, ideal
for blown film extrusion.
Riblene FF 33 F is characterised by a good melt strength leading to a good bubble stability during extrusion.
Films produced with Riblene FF 33 F have good optical properties, high shrink values and mechanical
properties.
Riblene FF 39 F
Riblene FF 39 F is a high molecular weight low density polyethylene (LDPE), suitable for blown film extrusion.
Riblene FF 39 F is characterised by a good melt strength leading to a good bubble stability during extrusion.
Films manufactured by Riblene FF 39 F are easily heat shrinkable and characterised by good optical and
mechanical properties.
Riblene FH 20
Riblene FH 20 is a low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FH 20 is
characterised by a good balance between processability and mechanical properties.
Films manufactured by Riblene FH 20 are easily heat shrinkable and have good optical and mechanical
properties.
Riblene FL 39 F
Riblene FL 39 F is a low density polyethylene (LDPE) ideal for blown film extrusion.
Riblene FL 39 F has a good balance between processability, mechanical properties, together with excellent
optical properties. Films manufactured by Riblene FL 39 F are easily heat shrinkable.
Riblene FM 34 F
Riblene FM 34 F is a low density polyethylene (LDPE), additivated with slip and antiblocking agent,
suitable for blown film extrusion.
Riblene FM 34 F is characterised by a good balance between processability, mechanical and optical
properties. Films manufactured by Riblene FM 34 F are easily heat shrinkable.
Riblene FM 34 I
Riblene FM 34 I is a low density polyethylene (LDPE), additivated with slip and antiblocking agent, suitable for
blown film extrusion.
Riblene FM 34 I is characterised by a good balance between processability, mechanical and optical
properties. Films manufactured by Riblene FM 34 I are easily heat shrinkable.
Riblene FM 50 F
Riblene FM 50 F is a low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FM 50 F is
characterised by optimum optical properties and rigidity.
Films manufactured by Riblene FM 50 F are easily heat shrinkable.
Riblene FM 52 F
Riblene FM 52 F is a low density polyethylene (LDPE), additivated with slip and antiblocking agent, suitable for
blown film extrusion. Riblene FM 52 F is characterised by optimum optical properties and rigidity.
Films manufactured by Riblene FM 52 F are easily heat shrinkable.
Riblene FM 53 F
Riblene FM 53 F is a low density polyethylene (LDPE), additivated with slip and antiblocking agent, suitable for
blown film extrusion.
Riblene FM 53 F is characterised by optimum optical properties and rigidity. Films manufactured by Riblene FM
53 F are easily heat shrinkable.
Riblene FL 34 F
Riblene FL 34 F is a low density polyethylene (LDPE), additivated with slip and antiblocking agent, suitable for
blown film extrusion.
Riblene FL 34 F is characterised by a good balance between processability, mechanical and optical
properties. Films manufactured by Riblene FL 34 F are easily heat shrinkable.
Riblene FL 34 I
Riblene FL 34 I is a low density polyethylene (LDPE), additivated with slip and antiblocking agent, suitable for
blown film extrusion.
Riblene FL 34 I is characterised by a good balance between processability, mechanical and optical
properties. Films manufactured by Riblene FL 34 I are easily heat shrinkable.
Riblene GM 20 R
Riblene GM 20 R is a medium fluidity low density polyethylene resin (LDPE), obtained from vessel process.
Riblene MQ 10 R
Riblene MQ 10 R is a low density polyethylene resin (LDPE).
Its fluidity and density values guarantee excellent processability and high flexibility characteristics to the products.
Riblene MP 30 R
Riblene MP 30 R is a medium fluidity low density polyethylene resin (LDPE).
Its fluidity and density values guarantee good processability and good flexibility characteristics to the products.
Riblene MP 20
Riblene MP 20 is a medium fluidity low density polyethylene resin (LDPE).
Its fluidity and density values guarantee good processability and excellent flexibilitycharacteristics to the products.
Riblene MR 10 R
Riblene MR 10 R is a low density polyethylene resin (LDPE).
Its fluidity and density values guarantee excellent processability and high flexibility characteristics to the products.
Riblene MP 31 R
Riblene MP 31 R is a medium fluidity low density polyethylene resin (LDPE) additivated with slip agent and anti block.
Its fluidity and density values guarantee good processability and good flexibility characteristics to the products.
Riblene MM 20 R
Riblene MM 20 R is a medium fluidity low density polyethylene resin (LDPE).
Its fluidity and density values guarantee good processability and excellent flexibility characteristics to the products.
Riblene MT 10 R
Riblene MT 10 R is a low density polyethylene resin (LDPE).
Its fluidity and density values guarantee excellent processability and high flexibility characteristics to the products.
Riblene GM 30 R
Riblene GM 30 R is a medium fluidity low density polyethylene resin (LDPE), obtained from vessel process.
Riblene GP 20 R
Riblene GP 20 R is a high fluidity low density polyethylene resin (LDPE), obtained from vessel process.
Riblene MV 10 R
Riblene MV 10 R is a low density polyethylene resin (LDPE).
Its fluidity and density values guarantee excellent processability and high flexibility characteristics to the products.
Riblene FC 30 BA
Low density polyethylene bio attributed.
Riblene FC 20 BA
Low density polyethylene bio attributed.
Riblene FC 39 F BA
Low density polyethylene bio attributed.
Riblene FC 39 BA
Low density polyethylene bio attributed.
Riblene FF 34 I BA
Low density polyethylene bio attributed.
Riblene FF 34 F BA
Low density polyethylene bio attributed.
Riblene FF 30 BA
Low density polyethylene bio attributed.
Riblene FC 40 F BA
Low density polyethylene bio attributed.
Riblene FL 20 R BA
Low density polyethylene bio attributed.
Riblene FL 34 F BA
Low density polyethylene bio attributed.
Riblene FL 23 I BA
Low density polyethylene bio attributed.
Riblene FL 30 I BA
Low density polyethylene bio attributed.